Detailed Product Description

Heat Pump Water Heater Controller

Main Technique Index:

1Range of Temperature Display -50150°C   

2 Range of Temperature Set 0100°C, the range can be set.

3 Power Supply 220V±10%

4Operation EnvironmentTemperature -1050,humidity ≤85%.

5Output Load Capability Compressor and Defrost 10A/250VAC,Others 2A/250VAC

6Temperature Sensor Type NTC R25=5kΩ,B(25/50)=3470K

7 Executive standard Q/320585 XYK 01-2004  (NA8651-HTDX)

Its main function is showing below:
1. Temperature Display and Controlling It can display water tank temperature and outdoor
machine temperature, and it can also control the temperature in water tank at the set temperature.
2. Auto Defrosting ControllingIt has defrosting controlling logic of heat pump optimization
design, and can defrost effectively in order to ensure that the outdoor machine can run normally
at low temperature, and it has the function of defrosting failure alarm.
3. Running in different period of time The controller has two modes: Autoand Econ, in
Econmode, the controller can set 3 periods of time at most, it can only heat in these periods of
time.
4. Leakage Protection If the leakage occurs, the controller will shut off all output.
5. OthersReal Time Clock, On-off State Memory When the power is off(Can be set), Direction of
cross valve can be set, Boot delay protection of compressor, Sensor Error Alarm, High Temperature Alarm, Add Fluorin, Test and so on.